Overhead garage door manual 1026

Toggle menu. Search Search. Login or Sign Up 0. About Us. Skip to brand menu. Skip entire nav. Keyless Entry. Screw Drive Rail Parts. Extension Springs. Universal Remotes Universal Keypads. The door rollers move up these rails. There will likely be a bunch of random holes in various places in the rail. Find some above one of the rollers - that is where we will mount the lock! Set the wood block on top of a roller give yourself some wiggle room here - maybe an inch or so up from the roller and mark a couple of the holes on the wood with the sharpie.

You know the marks from the previous step? Drill them out! You might want to ream the hole out a bit Put the bolts in the wood holes. I used the large nut as a spacer before putting the regular nut on and tightening it. If you didn't line the holes up perfectly, you might not be able to tighten one of the nuts completely.

Leaving it a bit loose will make the next step easier Put the bolt ends through the holes in the garage door rail. If you didn't drill the holes in the right space, you will have to loosen one of the nuts to give the bolt a bit of play. The second set of nuts can then be hand tightened to hold the lock onto the rail. All other trademarks are the property of their rightful owners. Consistent with our policy of. Installer: Leave this manual with homeowner.

Previous Page. Next Page. Garage door opener includes remote control and series ii electronics 36 pages. Complete with codedodger remote control and series ii electronics 31 pages. Standard Drive is a trademark of Overhead Door Corporation. Consistent with our policy of continuing product improvements, we reserve the right to change product specifications without notice or obligations. Page 2: Safety Information If you have questions or do not understand the information presented, contact Overhead Door Corporation or an authorized Overhead Door Dealer.

ODGER An electronic access code system that enhances the security of the door opener by continuously changing the access code each time the remote control is used. The door opener responds to each new code only once. Page 4: Pre-Installation Check List They are as follows: The Overhead Door Corporation recommends that you read and fully understand all information and instructions contained herein before choosing a "Do-it-yourself" COM Pg.

Child can be pinned under automatic garage door. BAG NO. Page 9: Safety Installation Information 6. Drive chain can slide out of rail.